Vehicle number plate recognition using matlab: Vehicle number plate recognition is the process by which the characters on a number plate are recognised. This is done using matlab. Installing project in your pc: You need to first have matlab in your pc. Download matlab from this link if you don’t Read more…
A pregnant woman can give birth to younger ones with or without a caesarean operation. They depend upon many factors like the age of the woman, what is the delivery number, delivery time (if the pregnant is brought to the hospital at the correct time or not), blood pressure of Read more…
Particle swarm optimization is one of the most used algorithms for optimisation problems. This algorithm is inspired from nature, where flocks of birds move in the air, altering their positions frequently to reach the destination. Generally, in a flock of birds, there will be a lead, whom other birds follow. Read more…
Multi-purpose Obstacle Detector and Picker is a robot whose main motto is to detect obstacles, pick them up if possible, and keep them in a bucket. Simply saying, it is a kind of a vacuum cleaner without a man to move it. This robot is mainly constructed using Arduino uno. Read more…
L293D is an IC, which is used to control 2 wheel and 4 wheel robots. It has 16 pins. L293D divides power into two parts, which can be controlled according to the input pins. The following code makes the robot move forward, backward, left, right. Connect the robot as shown Read more…
What is Fading LED: If the Brightness of the LED decrease from time to time, it is known as fading LED.In this Tutorial, we will write a code for a led light to blink for a time of ‘a’ milli seconds with some intensity and we will increase the intensity of Read more…
What is Temperature sensor: Temperature sensor is the Device which is used to measure temperature. It gives an analog value which is proportional to temperature. Higher the value, more the temperature.We are using LM35 sensor in this arduino tutorial. Code: Code explaination: Here, before void setup, we initialized temp_val to Read more…
The following is a simple arduino code, which is to control an LED using input of the serial monitor.If we enter 1 in the serial monitor, the LED will glow. If we enter 0 in the serial monitor, the LED doesn’t glow. Connect an LED to 5th analog pin and Read more…
What is Blink code: Blink code is one of the basic arduino codes which are done in Arduino IDE. In this code, we will write a code for a led light to blink for a time of ‘a’ milli seconds out of after a time period of ‘t’ seconds. Code for blink: Read more…
Dumping Code: After you complete your code, you need to compel the code and you need to upload it. To compel, you need to click on the ‘✓’ symbol and to dump the code, you need to click on the ‘→’ symbol. You need not compel the code before dumping, but Read more…